Certificate of Analysis-COA
Anhydrous Lithium Acetate
Composition | Content Requirements(%) | Test Value |
CH₃COOLi | ≥99.0 | >99% |
Na | ≤0.2 | 0.0085 |
Cl | ≤0.05 | 0.03 |
Ca | ≤0.2 | 0.0066 |
Fe | ≤0.002 | 0.0005 |
K | ≤0.1 | 0.0033 |
H₂O | ≤0.5 | 0.35 |
Water-insoluble matter | ≤0.2 | 0.0022 |
Appearance | White crystalline powder, fluid, no visible impurities |
Lithium Acetate Dihydrate
Items | Content Requirement (%) | Test Result (%) |
Main Content | ≥99.0 | >99.0 |
Na | ≤0.05 | 0.0036 |
K | ≤0.05 | 0.0009 |
Ca | ≤0.01 | 0.001 |
Mg | ≤0.01 | 0.0001 |
Fe | ≤0.002 | 0.0001 |
Ba | ≤0.005 | 0.001 |
Heavy metals (as Pb) | ≤0.003 | Not detected |
Cl | ≤0.005 | 0.002 |
SO₄ | ≤0.01 | 0.0008 |
Free Acid | ≤0.2 | Not detected |
Water Insoluble Matter | ≤0.01 | 0.0028 |
Applications
1. Nucleic Acid Precipitation & Electrophoresis Buffers — DNA and RNA ethanol precipitation, gel running buffers, capillary electrophoresis: A lithium counter-ion that precipitates nucleic acids while leaving a lower residual ionic strength than sodium salts, which matters for downstream enzymatic steps. Also used as a buffer component where a non-sodium, low-conductivity background is required.
2. Lithium Battery Materials & Electrolytes — cathode and electrolyte precursor, lithium salt synthesis, electrolyte additive screening: A clean, water-soluble lithium source for the preparation of lithium compounds and cathode precursors, and an additive studied for improving electrolyte conductivity and interfacial stability. Low moisture and a tight metallic impurity profile are the specification points that matter here.
3. Polyester & Coatings Polymerisation Catalyst — PET and copolyester polycondensation, alkyd and unsaturated polyester resins, industrial coatings: A lithium-based catalyst that accelerates polycondensation and resin cook, shortening cycle time and improving colour compared with heavier metal catalysts. Soluble in the glycol phase, so it disperses evenly and doses reproducibly at low addition.
4. Ceramics, Glass & Enamel — frits, glazes, low-melting glass, specialty enamels, ceramic pigments: A readily decomposed lithium source that introduces Li₂O into the melt, lowering softening point and viscosity and improving glaze flow and gloss. Acetate decomposition leaves no residual anion, so it does not colour the fired body the way some mineral lithium sources can.
5. Lithium Compound Precursor & Specialty Synthesis — lithium salts, lithium-based specialty chemicals, custom inorganic synthesis: A high-purity, easily handled precursor for producing other lithium compounds and for reactions where a soluble, mild, non-halide lithium source is needed.
Production Line
We operate 10+ production lines, backed by a well-stocked raw material warehouse.
Our workshop is equipped with automated machinery — ensuring high consistency and precision on every order, from trial samples to full container loads.
Every order follows a standardized workflow. Key quality control points are set at every stage.
Factory Area
Standardized Process Flow
Production Capacity
Located in Shandong, our factory is approximately 300km from Qingdao Port, enabling fast and cost-effective delivery to customers worldwide.