Home » Products » Water treatment grade Daily chemical grade Liquid 23% Powder 46% Aluminum Chlorohydrate CAS 12042-91-0

Share to:

Water treatment grade Daily chemical grade Liquid 23% Powder 46% Aluminum Chlorohydrate CAS 12042-91-0

Synonyms：aluminum chloride oxide
ACH
Aluminium chlorohydroxide
Basic aluminum chloride
Aluminum hydroxychloride
Formula:AlClH5O-
Weight:83.47
HS Code:3824999999
Grade:Water treatment grade，Daily chemical grade，Liquid 23%，Powder 46%
Hazard Class:General Chemical

Availability:



Inquire

Model:
12042-91-0
Brand:
futurechemical
Code:
12042-91-0

Product Description

Certificate of Analysis-COA

Water treatment grade Liquid

Items:	Specifications:	Results:
Appearance:	Transparent to slight hazy liquid	Transparent to slight hazy liquid
Alumina (Al2O3), %:	23-24	23.15
Chlorides(Cl) , %:	7.9-8.4	8.02
Specific Gravity g/ml	1.330-1.350	1.332
Atomic Ratio (Al:Cl):	1.90:1-2.10:1	1.99:1
Basicity , %:	≥82	83
Sulfate(SO4 2-) PPM	≤250	NOT DETECTED
Iron(Fe) PPM	≤100	94
Arsenic PPM	≤2	<2
Heavy Metals %	≤0.001	<0.0005
PH Value (15% aqueous) %	3.5-5.0	4.3

Water treatment grade powder

Item	Specifications	Results
Appearance	White powder	White powder
Alumina(Al2O3) %	46-48	46.60
Chlorides(Cl) %	≤18	16.04
Basicity	≥82	83
Atomic ratio(Al:Cl)	1.90:1~2.10:1	2.02:1
Sulfate (SO42- ppm	≤500	Not detected
Iron (Fe) ppm	≤200	175
Arsenic ppm	≤2	<2
Heavy metals %	≤0.002	<0.002
PH value(15% aqueous) %	3.5-5.0	4.0

Daily chemical grade liquid

Items:	Specifications:	Results:
Appearance:	Transparent to slight hazy liquid	Transparent to slight hazy liquid
Alumina (Al2O3),%.	23-24	23.16
Chlorides(Cl),%.	7.9-8.4	8.05
Specific Gravity g/ml	1.330-1.350	1.330
Atomic Ratio (Al:Cl):	1.90:1-2.10:1	1.99:1
Sulfate(SO4 2-) PPM	≤250	NOT DETECTED
Iron(Fe) PPM	≤75	72
Arsenic PPM	≤2	<2
Heavy Metals %	≤0.001	<0.0005
PH Value15% aqueous) %	4.0-4.4	4.3

Daily chemical grade powder

Item	Specifications	Results
Appearance	White powder	White powder
Alumina(Al2O3) %	46—48	47.35
Chlorides(Cl) %	15.8—16.8	16.80
Basicity	≥82	84
Atomic ratio(Al:Cl)	1.90:1~2.10:1	1.99:1
Water insoluble%	≤0.01	≤0.01
Sulfate (SO42- ppm)	≤500	Not detected
Iron (Fe) ppm	≤150	132
Mercury(Hg) ppm	≤0.2	<0.2
Arsenic ppm	≤2	<2
Heavy metals %	≤0.002	<0.002
PH value(15% aqueous) %	4.0-4.4	4.0

Applications

1. Drinking Water Treatment Coagulant: Dosed in municipal and industrial water plants to destabilize suspended solids and form dense fast settling flocs, removing turbidity, colour, total organic carbon, phosphate, fluoride and heavy metals, while consuming less alkalinity and generating less sludge than traditional alum.

2. Industrial Wastewater Clarification: Applied to textile dyeing, papermaking, electroplating, brewery and food processing effluents to cut chemical oxygen demand, colour and phosphorus, and to condition sludge before dewatering, working reliably over a wide pH and temperature range.

3. Paper And Pulp Wet End Additive: Acts as a strongly cationic polymer in papermaking wet end systems, neutralizing anionic trash and improving retention of fibre fines and mineral fillers, supporting rosin sizing and cleaner sheet formation with lower additive consumption.

4. Antiperspirant And Personal Care Active: Supplied in cosmetic grade quality for roll-on, stick and cream antiperspirant formulations, where it forms a gel plug at the sweat duct opening to reduce perspiration, and also serves as an astringent in underarm care products.

5. Oilfield And Process Water Clarification: Used to coagulate hypersaline produced water and flowback fluids in oil and gas operations, breaking stable emulsions and reducing turbidity ahead of dissolved air flotation, sedimentation or filtration, supporting water reuse and disposal compliance.

Production Line

We operate 10+ production lines, backed by a well-stocked raw material warehouse.

Our workshop is equipped with automated machinery — ensuring high consistency and precision on every order, from trial samples to full container loads.

Every order follows a standardized workflow. Key quality control points are set at every stage.

Factory Area

Standardized Process Flow

Production Capacity

Located in Shandong, our factory is approximately 300km from Qingdao Port, enabling fast and cost-effective delivery to customers worldwide.

Aluminum chlorohydrate 12042-91-0 AlClH5O- aluminum chloride oxide ACH Aluminium chlorohydroxide Basic aluminum chloride Aluminum hydroxychloride ACH water treatment ACH flocculant

Quality Assurance

Full-Process Quality Control: From incoming raw material inspection to in-process monitoring and final outgoing checks, every batch is inspected at each production stage against strict acceptance standards.
Third-Party Certified & Tested: Our quality management system is certified to ISO 9001, and products are regularly tested by accredited laboratories (e.g. SGS, TÜV). Test reports are available on request.
100% Batch Traceability: Each batch carries a unique lot number that links raw material records, production parameters, and test results, enabling complete traceability from factory to final delivery.
Pre-Shipment Inspection: Every order passes a final pre-shipment inspection, with inspection photos and reports shared before dispatch.

Send the water analysis, the system type and the operating conditions. Our sales team replies with the product selection, dosing recommendation and commercial details.

Request a Quote